BUS separator from power supply BPS3-01M

DESCRIPTION

•  The BPS3-01M and BPS3-02M units are used for impedance separation of the BUS from the supply voltage source.
• A BPS3-01M or BPS3-02M bus isolator is required for each CU3-XXM central unit.
•  BPS3-01M allows the connection of one BUS branch with a load of max. 3 A.
•  BPS3-02M allows the connection of two BUS branches with a load of max. 1 A for each branch.
•  The outputs are equipped with overcurrent and surge protection.
•  Indication of the output voltage of the BUS outputs by LEDs.
•  BPS3-01M, BPS3-02M in 1-MODULE design are designed for mounting in a switchboard on DIN rail EN60715.

TECHNICAL PARAMETERS

• Output:1x BUS
• Supply voltage (frequency):  BUS 27 V DC
• Rated current: 8 mA (at 27 V DC)
• Dimensions: 90 x 17.6 x 64 mm

Downloads

• Datasheet BPS3-01M BPS3-02M

  Format: pdf | Size : 175 kB | 13. 12. 2023

• EC Declaration of conformity BPS3-01M

  Format: pdf | Size : 50 kB | 04. 12. 2017

• Manual multilanguage BPS3-0xM

  Format: pdf | Size : 864 kB | 20. 04. 2020