Power supply PS3-100/iNELS

Describe

• PS3-100/iNELS is a stabilized switching power supply, with the total power of 100 W.
• Used to supply central units and external master within intelligent electro-installation iNELS.
• Through BUS separators from the supply voltage BPS3-01M and BPS3-02M, it supplies BUS lines from which iNELS peripheral units are also powered.
• Used in the instrumentation field.
• Fixed output voltage DC 27.6 V and DC 12.2 V, galvanically isolated from the mains.
• Power source of 27 V and 12 V have a common ground terminal GND.
• Electronic short circuit protection, high-capacity and thermal overload, over voltage.
• UPS functions - backup of output 24V and 12V on connected batteries.
• Recharging the batteries from 27 V source.
• Protection battery backup fuse - protection against short circuit and reverse polarity battery.
• Continuously adjustable maximum battery charging current.
• Indication of operating and fault conditions 6 LED diodes on the front panel of the power supply.
• 2 STATUS outputs with open collector for reporting operational status of the source.
• Source supplies power to the priority system iNELS, the remaining power is used for rechargeable batteries.
• When the battery is fully discharged, the battery is automatically disconnected from the load.
• PS3-100/iNELS in 6-MODULE version is designed for mounting into a switchboard, on DIN rail EN60715.

Technical parameters 

• Output: 27.6 V / 3.6 A, 12.2 V / 0.35 A
• Supply voltage (frequency): 100-250 V AC (50/60 Hz)
• Dimensions: 90 x 105 x 65 mm

Downloads

• Datasheet PS3-100 iNELS

  Format: pdf | Size : 211 kB | 05. 03. 2021

• EC Declaration of conformity PS3-100-iNELS

  Format: PDF | Size : 333 kB | 26. 04. 2019

• Manual multilanguage PS3-100 iNELS

  Format: pdf | Size : 929 kB | 03. 06. 2019