Binary input unit IM3-140M is designed to connect up to 14 devices with potentialless contact (such as switches, buttons of other designs, fi re and glass detectors and others).
Inputs IN1 - IN7 can be balanced.
Contacts of external devices connected to the inputs of the drive can be NO or NC - Input parameters are confi gured in the software iDM3.
Inputs must be confi gured as balanced or double balanced - in an internal Electronic security system confi gurated in iDM3 software.
The unit generates a supply voltage of 12 V DC / 150 mA for powering external detectors, so it can power PIR detectors, fire and gas detectors.
Active use 12 V DC output for powering detectors increases the nominal consumption units from BUS (see technical data).
The unit can be used for counting pulses of energy meters with pulse output.
IM3-140M in 3-module is designed for switchboard mounting on DIN rail EN60715.
E-shop
English GB
Česky
Slovensky
English
Deutsch
Polski
Български
Magyar
Românește
Tiếng việt
Ukraine
Español
Српски
Qatar
