CU3-09M is one of the basic system control units of iNELS BUS istallations.
The unit can work independently, as an autonomous project, or it can be controlled by the IP-MASTER as part of a larger project.
The unit is equipped with one BUS to swich it is possible to connect up to 32 elements from the iNELS BUS portfolio.
The current load of one line is max. 1 A. BPS3-01M with 3 A can be used incase of connected device with more than 1 A.
The CU3-09M/DALI system unit is equipped with one DALI bus.
The DALI system bus allow control of up 64 independent DALI ballast addresses for luminaires.
Addressing of DALI can be done via the iDM software.
The RJ45 100 Mbps Ethernet connector is used direct communication with the cloud for mobile app control or for communication with the superior unit within the iNELS IP topology.
Configuration takes place in the iNELS3 Designer & Manager software (iDM3).
Through iDM3 it is possible to update the fi rmware of central units and bus connected peripheral units.
The unit is powered by 27 V DC from inels power supply. BUS1 can power the central unit.
System units CU3-09M in 1-MODULE design are designed for mouting into a switchboard on DIN rail EN60715.
E-shop
English GB
Česky
Slovensky
English
Deutsch
Polski
Български
Magyar
Românește
Tiếng việt
Ukraine
Español
Српски
Qatar
