Digital room thermo-regulator IDRT3-1

Description

• Using the IDRT3-1, it is possible to correct the given heating/cooling circuit within a range of ±3, ±4 or ±5 °C (optional in SW iDM3).
• The temperature controller is equipped with an integrated heat sensor used to measure the room temperature. It is also equipped with two analog digital inputs (AIN/DIN), which can be used to connect two potential free contacts or a single external temperature sensor TC/TZ (e.g. for measuring the floor temperature).
• The display shows the current temperature and after pressing one of two buttons under the display, you can control the desired temperature.
• Readability improves after pressing one of the buttons to activate the backlight.
• Heating/cooling circuit is assigned with a thermo-regulator using iDM3.
• In the case of temperature correction within ±3, ±4 or ± 5 °C, this change is valid until the next time mark within the time schedule established in iDM3.
• IDRT3 -1 in design LOGUS90 is intended for mounting into an installation box.

Technical parameters 

• Number of buttons: 2 (for temperature correction)
• Supply voltage: BUS 27 V DC 
• Rated current from BUS: 20 mA (at 27 V DC)
• Internal temp. sensor: Yes
• Inputs: 2x temperature or 2x digital
• Dimensions plastic: 85.6 x 85.6 x 42 mm
• Dimensions other materials: 94 x 94 x 50 mm

Downloads

• Datasheet IDRT3-1

  Format: pdf | Size : 176 kB | 13. 12. 2023

• EC Declaration of conformity IDRT3-1

  Format: pdf | Size : 47 kB | 04. 12. 2017

• Manual multilanguage IDRT3-1

  Format: pdf | Size : 1 MB | 21. 04. 2020