Dimming actuator for LED (RGB) strips, 3-channels RFDA-73M/RGB
3-channels
EAN:
8595188146814
|
Code:
4916
Description
The dimmer for LED strips is used for independent control of 3 singlecolor LED strips or one RGB LED strip.
The expanded selection of control modes enables it to be combined with:
a) controllers and system units iNELS RF Control
b) control signal 0(1) - 10 V
c) connecting to iNELS BUS using DAC converters.
The unit‘s 3-MODULE design with switchboard mounting enables connection of dimmed load 3 x 5 A, which represents:
a) single-color LED strip 7.2 W (ELKO Lighting) – 3 x 8 m
b) RGB LED strip 14.2 W (ELKO Lighting) – 10 m.
6 light functions - smooth increase or decrease with time setting 2s - 30 min.
When switched off , the set level is stored in the memory, and when switched back on, it returns to the most recently set value.
The dimmer may be controlled by up to 25-channels (1-channel represents 1 button on the controller).
The power supply of the unit is in the range of 12 - 24 V DC, and is indicated by a green LED.
The package includes an internal antenna AN-I , in case of locating the unit in a metal switchboard, you can use the external antenna AN-E for better signal reception.
Signal range up to 160 m (in open space), if the signal is insuffi cient between the controller and unit, use the signal repeater RFRP-20 or protocol component RFIO2 that support this feature.
For components labelled as iNELS RF Control2 (RFIO2), it is possible to set the repeater function via the RFAF/USB service device.
Communication frequency with bidirectional protocol iNELS RF Control2 (RFIO2).
E-shop
English GB
Česky
Slovensky
English
Deutsch
Polski
Български
Magyar
Românește
Tiếng việt
Ukraine
Español
Српски
Qatar
