Join to our online upcoming free webinars...

Expansion power module for dimmer DIM-6 - DIM6-3M-P

EAN: 8595188139106 | Code: 3910

DESCRIBE

  • Expanding power module only for use in combination with DIM-6.
  • DIM6-3M-P provides power increasement (of about 1 000 VA) of load connected to DIM-6 (it means: 2 000 VA (DIM-6) + 1 000 VA
    (DIM6-3M-P) = 3 000 VA).
  • The DIM-6 can connect up to 8 pieces of DIM6-3M-P and control up to 10.000 VA (the load must be divided into individual power blocks so that their maximum power is not exceeded).
  • Attention-device has to be protected by circuit breaker accordant to the load connected to device.
  • DIM-6 in installation is cooled by natural air fl ow. If the natural air fl ow access is reduced, cooling has to be provided by ventilator. Rated operating temperature is 35 °C / 95 °F.
  • If there are several DIM6-3M-P connected to DIM-6, the distance between them has to be min. 2 cm / 0.8”.
  • Max. lenght of BUS EB is 1 m / 39.4” and the connection has to be realized by schielded cable.

TECHNICAL PARAMETERS

  • Dimmable loads: R - L - C - LED
  • Output: 2x MOSFET
  • Output loads: 1000 VA 
  • Protections: overheating and overload 
  • Housing: 3-MODULE
  • Supply voltage (frequency): AC 230 V (50 Hz)
  • Dimensions: 90 x 52 x 65 mm (3.5˝ x 2˝ x 2.6˝) 

Downloads

Customer Centre

Helpline

+420 800 100 671

Technical support

support@elkoep.com