Ligting control unit with pair detectors and external button input RFSAI-161B

Describe

• Switch component with one output channel which is used in combination with detectors for automatic lighting control.
• RFSAI-161B has a pre-set control algorithm (scene) adapted to the requirements of hotel room control, see wiring.
• Each RFSAI-161B can be programmed with 1x RFMD-100, 1x RFWD-100 and 1x wireless controller (RFWB-40/G or RF KEY).
• The terminals on the component give you the opportunity to connect a wired detector or an existing key installation.
• It enables connection of the switched load up to 1x 12 A (3000 VA).
• The programming button on the unit is also used for manual control of the output.
• Range up to 160 m (in open space), if the signal is insufficient between the controller and unit, use the signal repeater RFRP-20 or protocol component RFIO2 that support this feature.
• Communication frequency with bidirectional protocol RFIO2

TECHNICAL PARAMETERS

• Output: 1x NO, 12 A
• Supply voltage (frequency): AC 230 V (50/60 Hz); AC 230 V (50/60 Hz)
• Design: BOX
• Dimensions: 49 x 49 x 21 mm 
• Protocol: RFIO2

Downloads

• Datasheet RFSAI-161B

  Format: pdf | Size : 157 kB | 25. 07. 2023

• EC Declaration of conformity RFSAI-161B

  Format: pdf | Size : 48 kB | 27. 10. 2017