Switch unit for the shutters
RFJA-32B-SL

DESCRIPTION

• The switching unit for shutters has 2 output channels used to control garage doors, gates, blinds, awnings…
• They can be combined with Controllers or iNELS RF Control System Components.
• The BOX version offers to mount directly in the installation box, ceiling, or motor drive cover.
• RFJA-32B / 230V: connection of switched load 2x 8 A (2x 2000 W), with the possibility of connecting existing wire buttons.
• Short presses of the controller allow tilting of the slats, and long pressing of the raise / lower moves the blinds to the end position.
• Each component can be controlled by up to 25 channels (1 channel represents one assigned controller).
• The programming button on the device also serves as a manual output control.
• For components, the repeater function can be set via the RFAF / USB service device.
• Range up to 200 m (outdoors), in case of insufficient signal between the controller and the device, use the RFRP-20 signal repeater or components with the RFIO2 protocol that support this function.
• Communication frequency with bidirectional protocol iNELS RF Control2 (RFIO2).
• The contact material of the AgSnO₂.

TECHNICAL PARAMETERS

• Output: 2 x switching, 8 A
• Supply voltage (frequency): 230 V AC (50 - 60 Hz)
• Design: BOX
• Dimensions: 43 x 44 x 22 mm
• Protocol: RFIO2

Downloads

• Datasheet RFJA-32B-SL

  Format: pdf | Size : 122 kB | 21. 07. 2023

• EC Declaration of conformity RFJA-32B-SL 230V

  Format: pdf | Size : 47 kB | 26. 01. 2023