The switched socket with 16 A output channel is used to control fans, lamps, heaters and appliances, which are connected by a 16 A power cord.
They can be combined with detectors, controllers, iNELS RF Control or system components.
Multi-function design – button, impulse relay and time function of delayed ON or OFF with time setting of 2 s - 60 min.
The switched socket may be controlled by up to 32 channels .
Thanks to the socket design, installation is simple by direct insertion into the existing socket.
The programming button on the socket is also used for manual control of the output.
Memory status can be pre-set in the event of a power failure.
Range up to 200 m (in open space), if the signal is insuffi cient between the controller and unit, use the signal repeater RFRP-20 or protocol component RFIO2 that support this feature.
Communication frequency with bidirectional protocol RFIO.
TECHNICAL PARAMETERS
Type of load: R - L - C - LED - ESL max. 300 W/150 W
Supply voltage (frequency): AC 230 V (50/60 Hz) or AC 120 V (60 Hz)