Switching socket-plug - multifunction
RFSC-61N

DESCRIPTION

• The switched socket is used to control fans, lamps, direct heaters, and appliances, which are connected by a power cord with a plug up to 16 A.
• They can be combined with detectors, controllers, or iNELS RF Control system components.
• Multifunctional design - button, impulse relay and time functions of a delayed start or return with time setting 2 s - 60 min. 
• The switched socket can be controlled by up to 32 channels.
• The programming button on the socket also serves as a manual output control with indication.
• Possibility to set the output status memory in case of failure and subsequent power recovery.
• Range up to 200 m (outdoors) (in case of insufficient signal between the controller and the device, use the RFRP-20 signal repeater) or components with the RFIO2 protocol that support this function.
• Communication with bidirectional RFIO2 protocol.
• Thanks to the socket design, installation is simple and straightforward by plugging it into an existing socket.
• The contact material of the AgSnO₂ relay enables the switching of light ballasts.

Produced in 3 designs of sockets/plugs:
a)    French (CZ, SK, PL, FR)
b)    Schuko (HU, DE, RU, AT, RO, ES)
c)    British (GB)

TECHNICAL PARAMETERS

• Output: 1x switching, 16 A / AC1
• Supply voltage (frequency): AC 230 V (50-60 Hz)
• Protection: IP30
• Dimension: 63 x 110 x 74 mm
• Protocol: RFIO2

Downloads

• Datasheet RFSC-61N

  Format: pdf | Size : 95 kB | 21. 07. 2023

• EC Declaration of conformity RFSC-61N

  Format: pdf | Size : 48 kB | 26. 01. 2023