Switching units with external temperature sensor
RFSTI-11B-SL

DESCRIPTION

• The temperature element measures the temperature with an external sensor and at the same time controls the heating circuit (electric underfloor heating, air conditioning, boiler…).
• They can be combined with Detectors, Controllers or iNELS RF Control system components.
• It measures the temperature in the range -20 to +50 °C and sends it to the system component in a regular 5 min. intervals. It sends a signal when the temperature changes suddenly.
• The heating/cooling, hysteresis and off-set functions are set in the system component or application.
• It allows the connection of a switched load up to 8 A (2,000 W).
• Range up to 200 m (outdoors), in case of insufficient signal between the controller and the device, use the RFRP-20 signal repeater or component with the RFIO2 protocol that supports this function.
• Communication with bidirectional RFIO2 protocol.
• The BOX version offers installation directly in the installation box, ceiling or cover of the controlled appliance. Easy installation thanks to screwless terminals.
• External sensor TC (-20 to +80 °C) or TZ (-40 to +125 °C) with a length of 3 m, 6 m, 12 m.

TECHNICAL PARAMETERS

• Supply voltage: 230 V AC (50-60 Hz)
• Temperature measurement range: -20 ... +50 °C
• Output: 1x switching, 8 A
• Dimensions: 43 x 44 x 22 mm
• Communication protocol: RFIO2

Downloads

• Datasheet RFSTI-11B-SL

  Format: pdf | Size : 88 kB | 21. 07. 2023

• EC Declaration of conformity RFSTI-11B-SL

  Format: pdf | Size : 44 kB | 19. 07. 2022