The universal built-in dimmer is used to regulate light sources:
R – classic lamps (resistive load)
L – halogen lamps with wound transformer (inductive load)
C – halogen lamps with electronic transformer (capacity load)
ESL – dimmable energy-effi cient fl uorescent lamps
LED – LED light sources equiped with LED.
They can be combined with detectors, controllers, iNELS RF Control or system components.
6 light functions - smooth increase or decrease with time setting 2 s - 30 min.
Thanks to setting the min. brightness by potentiometer, you will eliminate fl ashing of the LED and ESL light sources.
The universal dimmer may be controlled by up to 25 channels.
Connection of the existing button on the control input „S“ enables combination of wireless control with classic (wired) control.
The programming button on the controller is also used for manual control of the output.
Memory status can be pre-set in the event of a power failure.
Range up to 160 m (in open space), if the signal is insuffi cient between the controller and unit, use the signal repeater RFRP-20 or protocol component RFIO2 that support this feature.
Communication frequency with bidirectional protocol RFIO2.
The BOX design lets you mount it right in an installation box, a ceiling or light cover.
TECHNICAL PARAMETERS
Output: R - L - C - LED - ESL, 160 VA (230V); 80 VA (120V)
Supply voltage (frequency): AC 230 V (50 Hz); AC 120 V (60 Hz)
E-shop
English
Česky
Slovensky
Deutsch
Polski
Български
Magyar
Românește
Tiếng việt
Ukraine
Español
English GB
Српски
Qatar
