The universal modular dimmer is used to regulate light sources:
R – classic lamps (resistive load)
L – halogen lamps with wound transformer (inductive load)
C – halogen lamps with electronic transformer (capacity load)
ESL – dimmable energy-effi cient fluorescent lamps
LED – LED light sources equiped with LED.
Control can be performed by:
a) detectors, Controllers and System units iNELS RF Control
b) by control signal 0(1)-10 V
c) potentiometer
d) existing button in the installation.
6 light functions - smooth increase or decrease with time setting 2 s -30 min.
Thanks to setting the min. brightness by potentiometer, you will eliminate flashing of the LED and ESL light sources.
The universal dimmer may be controlled by up to 32 channels.
The programming button on the controller is also used for manual control of the output.
The package includes an internal antenna AN-I, in case of locating the unit in a metal switchboard, you can use the external antenna AN-E for better signal reception.
Memory status can be pre-set in the event of a power failure.
Range up to 160 m (in open space), if the signal is insufficient between the controller and unit, use the signal repeater RFRP-20 or protocol component RFIO2 that support this feature.
Communication frequency with bidirectional protocol RFIO2.
The unit‘s three-module design with switchboard mounting.
TECHNICAL PARAMETERS
Output: R - L - C - LED - ESL, 600 VA (230V); 300 VA (120V)
Supply voltage (frequency): AC 230 V (50 Hz); AC 120 V (60 Hz)
E-shop
English GB
Česky
Slovensky
English
Deutsch
Polski
Български
Magyar
Românește
Tiếng việt
Ukraine
Español
Српски
