RFIM-20B: the wireless contact converter changes your existing wired button/switch to a wireless one.
- two inputs enable control of two units independent.
- battery power supply (1x 3 V CR 2477 battery
- included in the supply) with battery life of around 5 years based on frequency of use.
- contact can be permanently closed (does not drain on the battery).
It can be used to transmit information on switching on the contact (detector, button, technology, logic output).
When pressing the button, it sends a set signal (ON/OFF, dimming, time switching OFF/ON, blinds up/down).
Option of setting light scenes, where with a single press, you can control multiple units of iNELS RF Control.
Range up to 200 m (in open space), if the signal is insufficient between the controller and unit, use the signal repeater RFRP-20 or protocol component RFIO2 that support this feature.
Communication frequency with bidirectional protocol RFIO.
The BOX design lets you mount it right in an installation box under the button or switch.
E-shop
English GB
Česky
Slovensky
English
Deutsch
Polski
Български
Magyar
Românește
Tiếng việt
Ukraine
Español
Српски
