The switching unit with 2 output channels 8A used to control two independent appliances.
They can be combined with detectors, controllers, iNELS RF Control or system components.
Function: button, impulse relay and time function of delayed start and return with time setting range of 2 s - 60 min.
Each of the channels may be controlled by up to 12 channels.
The programming button on the unit is also used for manual control of the output.
Memory status can be pre-set in the event of a power failure.
Range up to 100 m (in open space), if the signal is insuffi cient between the controller and unit, use the signal repeater RFRP-20 or protocol component RFIO2 that support this feature.
Communication frequency with bidirectional protocol RFIO2.
The BOX design lets you mount it right in an installation box, a ceiling or controlled appliance cover.
TECHNICAL PARAMETERS
Output: 2x NO, 8 A
Supply voltage (frequency): AC/DC 12-24 V (50/60 Hz), AC 120 V (60Hz) or AC 230 V (50/60 Hz)
E-shop
English GB
Česky
Slovensky
English
Deutsch
Polski
Български
Magyar
Românește
Tiếng việt
Ukraine
Español
Српски
