Wireless switch unit with the input (for a pushbutton) - RFSAI-61B
By installing the actuator under the existing button, we achieve further lighting control options when using RF Control wireless transmitters or the RF Touch unit
EAN:
8595188145893 (230V)
|
Code:
4997 (230V)
DESCRIPTION
The switching unit with 1 output channel is used for controlling appliances and lights. It is possible to connect the existing button to the internal terminal in the wiring.
They can be combined with detectors, controllers, iNELS RF Control or system components.
The BOX design lets you mount it right in an installation box, a ceiling or controlled appliance cover.
It enables connection of the switched load up to 16 A (4 000 W).
Function: button, impulse relay and time function of delayed start or return with time setting range of 2 s-60min.
External button is programmed as a wireless button.
Input is not galvanic isolated.
The switching unit may be controlled by up to 25 channels (1 channel represents 1 button on the controller).
The programming button on the unit is also used for manual control of the output.
Memory status can be pre-set in the event of a power failure.
For components it is possible to set the repeater function via the RFAF / USB service device.
Range up to 200 m (in open space), if the signal is insuffi cient between the controller and unit, use the signal repeater RFRP-20 or protocol component RFIO2 that support this feature.
Communication frequency with bidirectional protocol iNELS RF Control2 (RFIO2 ).
TECHNICAL PARAMETERS
Power supply AC 230 V, AC 120 V or AC/DC 12 – 24 V.
Number of contacts: 1x switching 12 A (AgSnO2)
RF command from the detector: 866 MHz, 868 MHz, 916 MHz
E-shop
English GB
Česky
Slovensky
English
Deutsch
Polski
Български
Magyar
Românește
Tiếng việt
Ukraine
Español
Српски
