The device with analog output 0(1) -10 V is used to control devices, luminaires, thermal actuators and thermal heads - which are equipped with such an input.
They can be combined with detectors, controllers, iNELS RF Control or system components.
Potential free analog output 0(1) -10 V, contact relay 16 A.
6 light functions - smooth increase or decrease with time setting 2 s - 30 min.
The analog controller may be controlled by up to 25 channels.
The programming button on the controller is also used for manual control of the output.
Memory status can be pre-set in the event of a power failure.
Range up to 200 m (in open space), if the signal is insuffi cient between the controller and unit, use the signal repeater RFRP-20 or protocol component RFIO2 that support this feature.
Communication frequency with bidirectional protocol RFIO2.
The BOX design lets you mount it right in an installation box, a ceiling or light cover.
TECHNICAL PARAMETERS
Output: 0(1) - 10 V contact 1 VA
Supply voltage (frequency): AC 110-230 V (50/60 Hz)
E-shop
English GB
Česky
Slovensky
English
Deutsch
Polski
Български
Magyar
Românește
Tiếng việt
Ukraine
Español
Српски
