The switching unit for blinds has 2 output channels used to control garage doors, gates, blinds, awnings, etc.
It can be combined with Control or System units iNELS RF Control.
RFJA-32B/230V (120V): relay contacts 2x 8 A (2x 2000 W), with the possibility of connecting external buttons. The relays block each other (only one direction of movement at a time).
RFJA-32B/24VDC: contactless quiet switching with the ability to connect existing buttons. The drive is controlled by changing the polarity.
Short presses (<2 s) of the controller enable tilting of lamellas, and a long press (>2 s) enables you to draw the blinds up or down to the end position.
Each of the units may be controlled by up to 25 channels.
The programming button on the unit is also used for manual control of the output.
Range up to 100 m (in open space), if the signal is insuffi cient between the controller and unit, use the signal repeater RFRP-20 or protocol component RFIO2 that support this feature.
Communication frequency with bidirectional protocol RFIO2.
The BOX design lets you mount it right in an installation box, a ceiling or motor drive cover.
TECHNICAL PARAMETERS
Output: 2x NO, 8 A; contactless
Supply voltage (frequency): 230 V AC (50/60 Hz); 120 V AC (60 Hz); 5-24 V DC
Design: BOX
Dimensions: 49 x 49 x 21 mm (RFJA-32B/230V; RFJA-32B/120V); 49 x 49 x13 mm (RFJA-32B/24V)
E-shop
English GB
Česky
Slovensky
English
Deutsch
Polski
Български
Magyar
Românește
Tiếng việt
Ukraine
Español
Српски
